The Belkin N300 wifi range extender is usually used to extend the network signals. The network connectivity is more strong & faster. The network signals of the range extender completely eliminate Wifi dead zones. The data transfer rate of the range extender is 300 Megabits per second. The network signals reach hard-to-area & penetrating walls. Additionally, the Belkin N300 WiFi range extender works with all brands of routers as well as access points.
It works with G & N wireless network. This extender is the perfect & optimum solution for better network coverage. The N300 range extender offers 5,500 square feet of network coverage. It thoroughly works virtually with any wireless standards router. By using the network range of this extender, you can simply raise the wireless range.
Furthermore, the Belkin N300 wireless gigabit router comes along with a smart indicator LED light. This LED light is generally more beneficial for the signals network. If the LED light blinks, then the WiFi range is slow. The belkin n300 wireless range extender setup is most important & essential to enhance the network. You can simply connect your mobile phone to the range extender, & enjoy streaming, gaming, & more.
Why is LED light important for the N300 WiFi Range Extender?
The Belkin N300 wireless gigabit router delivers a full-speed wireless connection around your home. It thoroughly supports a wireless speed of up to 300Mbps. The wireless network of the range extender entirely kills the WiFi dead zone. The main feature of this extender device is LED light. These LED lights are commonly more useful for the wireless range. With this LED light, you can simply estimate the network signals.
If the LED light status is blinking that means the network connectivity. Additionally, if the LED light status is red that means the range extender is far installed away from the standard router. If the LED light status is orange that means the range extender firmware is corrupt. Thus, the LED light is truly more useful for the range extender.
Causes: Belkin N300 WiFi Range Extender Light Issues
If the LED light issue is caused by the N300 Wifi extender. Then, the user is not able to access the wireless range. There are some causes due to the light issues occurring.
- Extender firmware is corrupt
- Install extender incorrect position
- Not connecting to the standard router
- No internet connection
Troubleshooting: Belkin N300 WiFi Range Extender Light Issues
If the Belkin range extender has no light or LED light status continuously blinking, then you need to verify the location, connection, and more. Here are some troubleshooting steps to accurately resolve the light issue.
Restart the Belkin N300 wifi extender
To resolve the light issue in a quick manner, you can restart the extender. To restart the extender, firstly ensure the LED light status. Then, you have to carefully unplug from the power supply. If any cable connection is established then you can remove the cable connection. To restart the range extender, you have to press the power button for 2 seconds. Then the LED light status is off.
After 10 minutes, you can also switch ON the power of the range extender. Press the extender’s power button & completely switch ON the extender. Now the LED light issue will be fixed.
Move the range extender closer to the router
To resolve the LED light issue, you can move the range extender position. Because sometimes, you place the range extender in the incorrect position. If the range extender is placed near the warming source, then the range extender is not working.
To resolve the issue, you always place the range extender near the standard router. Moreover, you ensure the position of the extender is cool. In the heating area, the extender does not work properly. You can also check the extender setting. By belkin.range you can simply check the setting of the range extender.
Verify the Ethernet & power connection
To properly fix the LED light issue, you have to verify the Ethernet cable connection. If you have to establish the Ethernet cable connection then you need to properly examine this connection. Because sometimes, in the Ethernet cable connection, the cable does not plug properly. Then, you need to properly & correctly connect the Ethernet cable into an available Ethernet port. Also, ensure the power cord is securely plugged into the power connector. If the cable is loose then no LED light status in the range extender.
Reset the N300 gigabit extender
After applying all the common solutions if the light issue does not fix properly then the last option is you need to perform the hard reset. The range extender comes along with a reset button. Then, with this button, you properly reset the extender device.